Sango Automation has been a leading factory to produce Linear Modular Actuators, and supplies diverse SGA Linear modules such as screw linear modules, belt linear modules, and semi closed and fully closed respectively for different environment application.
Linear Modular Actuators, also named as Linear Axis Actuator, Linear Motion Module, Single Axis Linear Actuator, Linear Axis Actuator etc.
SGA Linear Modular Actuator can run with world famous band motors by 50W, 100W, 200W/ 400W/ 750W/ 1000W or 42, 57,86 stepper motors or NMEA17, NMEA23, NMEA34 stepping motors in quality aluminum frame system to guarantee precise and speed requirement of various precision and common application projects. You can choose linear modules with brake or without brake.
SGA Linear modules type DM100 with body with by 100mm have 5 series. They are semi closed screw driven, fully closed screw driven, and semi closed belt driven, fully closed belt driven. These types have strokes from 0 mm to 3500 mm, and payload from 3kg to 80kgs.
It could be applied in PCB detection, PCB labeling, Products inside the shielded box up and down loading, multiple assembly lines with various products loading operation, picking, electronic components inspection etc.
Basic Specification of DM100 series
Model No |
DMS100-CM |
DMS100-CR |
DMB100-CM |
DMB100-CR |
||||||||||
Drive solution |
Ball screw |
Ball screw |
Timing belt |
Timing belt |
||||||||||
Sealed or not |
Semi closed |
Fully closed |
Semi closed |
Fully closed |
||||||||||
Motor power AC (W) |
100/200/400W |
|||||||||||||
Repeatability (mm) |
±0.01/±0.005 |
±0.04 |
||||||||||||
Ball screw outer diameter (mm) |
16 |
1:1 |
1:2 |
|||||||||||
lead (mm) |
5 |
10 |
16 |
20 |
32 |
90 |
45 |
|||||||
Fastest speed Motor speed 3000 (rpm) |
250 |
500 |
800 |
1000 |
1600 |
4500 |
2250 |
|||||||
Max |
Acceleration |
Horizontal |
0.3G |
50/65/65 |
30/45/65 |
20/30/50 |
15/20/35 |
9/12/20 |
4/10/20 |
8/22/40 |
||||
Vertical |
0.3G |
12/15/25 |
8/10/15 |
5/6/10 |
3/5/8 |
- |
- |
|||||||
Rate Thrust (N) |
341/682/1364 |
170/360/720 |
106/212/424 |
85/170/340 |
53/106/212 |
20/45/91 |
45/90/182 |
|||||||
Linear guide (mm) |
15*12.5-2 |
|||||||||||||
Origin sensor: |
Plug-in |
EE-SX674(NPN)EE-SX674P(PNP) |
||||||||||||
Inside |
E2S-W13 |
Model No |
DMS100L-CM |
||||||||
Drive solution |
Ball screw |
||||||||
Sealed or not |
Semi closed |
||||||||
Motor power AC (W) |
100/200/400W |
||||||||
Repeatability (mm) |
±0.01/±0.005 |
||||||||
Ball screw outer diameter (mm) |
16 |
||||||||
lead (mm) |
5 |
10 |
16 |
20 |
32 |
||||
Fastest speed Motor speed 3000 (rpm) |
250 |
500 |
800 |
1000 |
1600 |
||||
Max |
Acceleration |
Horizontal |
0.3G |
50/70/80 |
30/47/70 |
20/30/50 |
15/24/35 |
9/15/22 |
|
Vertical |
0.3G |
12/15/25 |
8/10/15 |
5/6/10 |
3/5/8 |
- |
|||
Rate Thrust (N) |
341/682/1364 |
170/360/720 |
106/212/424 |
85/170/340 |
53/106/212 |
||||
Linear guide (mm) |
15*12.5-2 |
||||||||
Origin sensor: |
Plug-in |
EE-SX674(NPN)EE-SX674P(PNP) |
|||||||
Inside |
E2S-W13 |
SGA Linear Modules Phantom View
How can we Make Model Selection:
It is recommended to provide the following data of each axis in X, Y and Z as follows:
Stroke: __mm
Speed: __mm/s (100, 300, 500, 700...)
Payload: __KG (horizontal or vertical?)
Drive solution: Screw driven or Timing belt driven
Repeatability: __mm (Belt drive: 0.04; Ball screw drive: 0.01 or 0.005)
Application: __
Working Environment: __ (Common? Dusty? High temperature?)
What is the Combination of Linear Modules in Different Application?
Multiple Input End Connection for Diverse Application
What Type of Application can be Used with Linear Modules? Application sample:
Why choose Sango Automation?
FAQ
Related knowledge:
Which industries are linear modules used for? How should it be classified?
1. Painting
The linear module can be accurately positioned and stable operation
Image visual inspection device
Utilizing the characteristics of high positioning accuracy and telling running stability of the linear slide module, it can be used to perform AOI inspection of appearance
3. Surface treatment
Using the sliding table's constant speed and stable movement characteristics, the workpiece can be hung on the sliding table and immersed in the solvent, which can smoothly perform the surface treatment
Substrate printing
Utilizing the sliding table's constant speed and stable movement characteristics, the substrate can be fixed on the sliding table's moving seat to perform the printing operation
Circuit board cutting
Use the sliding table to move at a constant speed and stable, with the cutter mechanism to perform the cutting operation
6. Part assembly operations
Utilize the characteristics of multi-point positioning and accurate positioning of the servo slide, which can smoothly perform the assembly of parts
7. Production line handling operations
Utilize the module's high load and tellable running characteristics, it can be used to carry out the goods handling operation on the conveyor belt
8. Packing entire operation
Utilizing the characteristics of high positioning accuracy of single-axis robots, it can be used for the entire movement on the conveyor belt
9. Large items pick and place operation
Using the characteristics of high load and high positioning accuracy of the robot, it can be used to replace the manual execution of large items.
10. Machine tool processing pick and place operation
Using the high positioning accuracy and high-speed stability of the linear module, it can be used with a machine tool to execute the pick-and-place mechanism for loading and unloading of processed parts
Print job
Use the feature that the slide can move at the same speed and at the same distance to perform laser printing
Pick and place entire columns
The linear module can be accurately moved, using a two-axis module sliding table, with a fixture or suction cup can be assembled into a pick and place mechanism
13. Automatic soldering operation
Utilizing the characteristics of high positioning accuracy and high stability of the servo slide, it is possible to perform the soldering operation of complex circuit board parts
14. Large LCD glass substrate coating equipment
Using the design method of gantry connection, the glue gun is fixed on the Z axis and can be used for high-speed glue application
15. Winding device
The characteristics of sliding table can be moved with high precision and accurate and fixed speed operation
Main products---electric slide (manipulator, actuator, linear module, electric cylinder)
The electric slide table is widely used in precise positioning and moving animal materials, and can be basically used in the automation industry involved. Commonly used in the following industries:
Electronics industry equipment: dispensers, placement machines, etc.:
Battery equipment: power battery laminator, etc.;
Laser equipment: laser welding machine, laser cutting machine, laser marking machine, etc.;
Spraying equipment: spraying manipulator, etc.;
Cutting equipment; plasma cutting machine, flame cutting machine, etc.;
Die-casting machine, injection molding machine reclaiming manipulator, etc.
http://www.sango-automation.com/